Yb:CaF2–YF3 transparent ceramics ultrafast laser at dual gain lines

Yb³⁺:CaF₂-YF₃ transparent ceramics with excellent optical quality was successfully fabricated by hot-pressed method. Pulsed laser properties of this ceramics were investigated for the first time. Laser diode (LD) was applied as the pump source to generate a dual-wavelength mode-locked (ML) laser. The maximum average output power was 310 mW, which represents the highest output power of ultrafast calcium fluoride ceramic laser. The spectrum separated at 1048.9 nm and 1049.7 nm with a total pulse duration of 8.9 ps. The interval period between the beating signals was about 4.3 ps, corresponding to a 0.23 THz beat pulse repetition rate. These results demonstrate its potential in producing dual-wavelength ultrashort pulses. These Yb³⁺:CaF₂-YF₃ ceramics with low-cost and short-preparation period are ideal candidate materials for ultrafast lasers.     

高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

被动谐波锁模Er3+/Yb3+共掺双包层光纤环形腔激光器

 为了实现高重复频率和高功率的光脉冲,实验采用Er³⁺/Yb³⁺共掺双包层光纤作为增益介质,稳定的中心波长为976 nm的高功率半导体激光器作为泵浦源,利用非线性偏振旋转锁模技术,得到稳定的自起振锁模光脉冲。当泵浦功率为2.4 W时,激光器输出重复频率为8.829 MHz的连续锁模光脉冲,平均输出功率为52.5 mW,自起振锁模泵浦阈值功率为0.6 W,并观测到了稳定的高阶谐波锁模、调Q和调Q-锁模光脉冲输出。     

半导体可饱和吸收镜实现固体激光器皮秒锁模的机理研究

对半导体可饱和吸收镜(SESAM)实现固体激光器皮秒锁模的机理进行了研究。通过对染料锁模介质和SESAM的结构对比,对SESAM皮秒锁模机理提出了一个新的解释。其在锁模激光器中充当锁模器件时,不仅仅是一个吸收体,同时也是一个增益介质。当腔内增益和损耗保持平衡时实现稳定的连续锁模。     

Harmonic Mode-Locked Er-Doped Fiber Laser Based on a Microfiber-Based PbS Nanoparticle Saturable Absorber

Lead sulfide (PbS) is a nanomaterial with excellent optical and chemical properties, such as a narrow bandgap (0.37 eV), high thermal damage threshold, and high stability. Obviously, it is appropriate as a saturable absorber (SA) device for ultrafast photonics. However, PbS nanoparticles (NPs) as the SA of ultrashort harmonic mode-locked pulse still haven't been demonstrated at present. In this paper, the PbS NPs are made into an SA-device-based microfiber by optical deposition method and connected in an integrated Erbium-doped fiber laser. And both characteristics and nonlinear optical properties of PbS NPs have been systemically investigated. A fundamental frequency mode-locked pulsed laser is proposed, whose central wavelength is 1560 nm, and the pulse width is 1 ps. In addition, high repetition rate operations are achieved, with a maximum repetition rate of 833 MHz. This is the first time that PbS NPs are used to generate 96th-order harmonic mode-locking, and the corresponding pulse duration is 987 fs. It is demonstrated that PbS NPs are a kind of SA photonic material with excellent performance. It can improve the communication capacity by applying fiber communication, and it has potential application value even in material processing and optical comb.     

高信噪比多波长2 μm主动锁模光纤激光器

介绍一种多波长掺铥主动锁模光纤激光器,增益介质为长2 m的掺铥光纤,主动锁模通过铌酸锂强度调制器实现。腔内加入基于双折射的光学滤波器,利用保偏光纤双折射滤波效应在滤除腔内多余超模噪声的同时,还可以实现多波长输出。基频下的锁模脉冲频谱信噪比可达68.48 dB,在稳定的锁模状态下波长信道数最大为5。此外,腔内偏振无关隔离器被替换为偏振相关隔离器后,将锁模脉冲加载数字信号同步调制,测得的眼图光信噪比提高了8.67 dB。测试结果表明,锁模脉冲的时间稳定性得到有效提升。     

分布反馈式光纤激光器线宽特性及其展宽机理研究

针对分布反馈式光纤激光器(DFB-FL)线宽特性进行了深入研究.通过理论推导和实验验证, 分析了自脉动、相 移光栅、激射窗口宽度以及外界环境扰动等因素对DFB-FL线宽的展宽作用. 进一步提出了压缩DFB-FL线宽的有效方法和途径,给出了自注入锁模方式下对DFB-FL线宽压缩的对比实验结果, 将DFB-FL的线宽从35 kHz压缩到了10 kHz.     

The Application of Mode-Locked Laser Technologies to Long Distance Transmission and Control of Soliton

The control scheme of long distance optical transmission is treated based on conception of mode-locked Laser cavity in this paper. The general mode-locking equation of fiber ring soliton Laser is first constructed, then we give the general perturbed nonlinear schrödinger equation, and finally the transmission and control equations of optical soliton communication systems with various different configurations, respectively, are obtained.     

2μm波段全光纤保偏被动锁模掺铥光纤激光器

报道了2μm波段的全光纤保偏锁模掺铥光纤激光器,通过在法布里-珀罗(F-P)腔内加入半导体可饱和吸收镜做为被动锁模器件,采用主振-放大构型,获得了最高输出平均功率为1.08W,重复频率为10.24MHz,脉冲宽度为15.24ps,中心波长为2054.68nm,光谱宽度约为0.3nm的2μm线偏振激光脉冲输出,激光脉冲的消光比为24.17dB。